Описание

Фиксатор тарелки гидроабразивной резки 20474391

Фиксатор тарелки гидроабразивной резки 20474391 применяется для насоса SL-VI 50 л.с.

Узел уплотнительной головки

How you can use waterjet poppet retainer 20474391

The waterjet poppet retainer is a component that is used to hold the waterjet poppet valve in place within the waterjet pump. The retainer serves as a locking mechanism that secures the poppet valve in the closed position when the waterjet pump is not in use, preventing water from flowing back out of the pump.

To use a waterjet poppet retainer, you will first need to locate the poppet valve within the waterjet pump. The poppet valve is typically located at the inlet of the pump and is connected to the pump body by a retaining ring or similar mechanism.

To install the poppet retainer, you will need to remove the retaining ring or other mechanism that is holding the poppet valve in place. Once the poppet valve is free, you can insert the retainer into the valve body and press it firmly into place. The retainer will typically snap into place, securing the poppet valve and preventing it from moving.

With the poppet valve secured in place by the retainer, water will not be able to flow back out of the pump when it is not in use. This helps to prevent any damage to the pump or other components of the waterjet propulsion system that could be caused by water or debris flowing back into the system.

When you are ready to use the waterjet pump again, you can simply remove the poppet retainer by pulling it out of the valve body. This will allow the poppet valve to open andallow water to flow into the pump when it is turned on.

It is important to note that proper installation and use of the waterjet poppet retainer is essential for the safe and effective operation of the waterjet pump. If the retainer is not installed or used correctly, water may be able to flow back out of the pump, potentially causing damage or injury. It is important to follow the manufacturer’s instructions carefully when installing and using a waterjet poppet retainer, and to ensure that all components of the waterjet propulsion system are properly maintained and inspected on a regular basis.