010642-1 Ремкомплект обратного клапана водоструйной резки

Описание

010642-1 Ремкомплект обратного клапана водоструйной резки

The 010642-1 Check Valve Repair Kit is a kit designed for repairing the check valve on a waterjet machine. The check valve is an important component that prevents water from flowing back into the high-pressure pump and causing damage.

The 010642-1 Check Valve Repair Kit waterjet kit typically includes replacement parts for the check valve, such as o-rings, springs, and valve discs. These components may wear out over time due to use or exposure to harsh operating conditions, such as high pressure and abrasive fluids.

To use the kit, the check valve must first be disassembled, typically by removing the retaining ring or screws that hold the valve together. The worn or damaged components can then be replaced with the new parts included in the kit. Once the new parts are installed, the check valve can be reassembled and installed back into the waterjet machine.

A check valve is a type of valve that allows fluid to flow in one direction but prevents it from flowing in the opposite direction. In a 010642-1 Check Valve Repair Kit waterjet the check valve is typically installed at the outlet of the high-pressure pump and serves to prevent the water from flowing back into the pump when the machine is turned off or the pressure is released. This is important because the high-pressure pump is not designed to handle water flowing in the reverse direction, and doing so can cause damage to the pump and other components of the machine.

The010642-1 Check Valve Repair Kit waterjet consists of a valve body with an inlet and outlet, as well as a valve disc that moves up and down to open and close the valve. The valve disc is typically held in place by a spring, which provides the necessary force to keep the valve closed when there is no water flowrate.