Waterjet Retaining Ring 05034798

SKU: N/A

There is no doubt that high-pressure waterjet cutting is superior to other cutting methods, but even this cannot be done at will. Regardless of the cutting material or the operation process, some points that should be paid attention to still need to be paid attention to carefully, such as these points summarized by the editor.

Description

Waterjet Retaining Ring 05034798

Waterjet Retaining Ring 05034798is applied for SL-VI 50HP pump

 

ItemPart NumberDescriptionItemPart NumberDescription
172160831High Pressure Cylinder1405034764

 

Hydraulic Cylinder

 

205119151Plunger

 

1510075000

O-Ring, 3.75 x 4.0 x .13
372142526

 

Sealing Head Assembly1605034855

 

Backup Ring, 3.75 x 4.0
405034772

 

Hydraulic Cylinder Head1705141106

 

Socket Head Screw, M14 x 60MM
520422243

 

HP Seal Assembly1872146433

 

Proximity Switch Kit

 

780073646

 

Cylinder Nut

 

2005132253

 

Piston Assembly

 

805130091

 

Hydraulic Seal Cartridge Assembly2120427804

 

Intensifier Support

 

905007786

 

Bushing Retainer Flange2220427994

 

Socket Head Screw, M10 x 1.50 x 65MM
1020497767

 

Liner, HP Cylinder2305061486

 

Lock Washer, M10

 

1110074920

 

O-Ring, 1.75 x1 .94 x .092410074409

 

O-Ring, 1.0 x 1.25 x .13
1280070352

 

Jackbolt

 

2505144183

 

Spacer Assembly, Proximity Switch
1305034798

 

Retaining Ring

 

2605081872

 

Gasket, Topworks Support

What should be paid attention to during the use of high-pressure waterjet?

There is no doubt that high-pressure waterjet cutting is superior to other cutting methods, but even this cannot be done at will. Regardless of the cutting material or the operation process, some points that should be paid attention to still need to be paid attention to carefully, such as these points summarized by the editor.

The thickness of the cutting material is directly related to the configuration of the waterjet, so when using it, use this as the basic basis to choose a suitable cutting head. It is not that the larger the cutting head, the better the effect. If the material thickness does not reach 2.5, the medium or large cutting head will have the output of the British system.

Secondly, if there is a gap between the material and the material, the water column sprayed by the waterjet will diverge in the gap during cutting, resulting in rough surface of the cutting material and affecting the cutting effect. When encountering some special materials, it is recommended that you choose underwater cutting operation, which is beneficial to improve cutting accuracy.

Criteria for quality waterjet

Waterjet is a commonly used processing tool in the field of cutting, but it is not up to the manufacturer to decide whether it is good or not. The key is to analyze its efficiency, failure rate, cost and other aspects. So what is the relationship between these and the service life of the high-pressure parts of the water jet? What is the standard for a high-quality water jet?

Whether the waterjet is high-quality or not should be judged from three aspects. On the one hand, it is its cutting efficiency, including the cutting quality and cutting speed. In general, the lower the cutting speed, the higher the quality of the cut produced by the water jet. Another aspect is the durability of the water jet, that is, the lower the failure rate, the higher the durability of the water jet. The quality of the devices configured in the water jet, such as high-pressure cylinders, accumulators, high-pressure plungers, check valve body plugs, high-pressure seals, and check valves, will directly affect the failure rate of the water jet.

Another aspect is the cutting cost of the waterjet, which also includes the cost of repair and maintenance. Since there is no common standard for water jet at present, the interchangeability of parts is very low, so after the meeting of purchasing water jet, the price of accessories should also be taken into consideration.

Reviews

There are no reviews yet.

Be the first to review “Waterjet Retaining Ring 05034798