Beschreibung

CNC Water Jet Cutting Gland 05116777

CNC Water Jet Cutting Gland 05116777 Wird für die SL-VI 50HP-Pumpe verwendet

Sealing Head Assembly

CNC water jet cutting machine made cutting hard materials easy

The CNC water jet cutting machine is mainly used to cut materials. The water jet is actually a stream of water. How does it cut hard materials? Although it is difficult for us to imagine, it has indeed been done, and the effect of completion is also very good.

The water flow of the water jet is not an ordinary water flow, but it is pressurized by a high-pressure intensifier pump, and then sprayed out through a very fine nozzle made of carbide, sapphire, diamond, usw., so it is used to cut materials easy. Of course, this also includes strict requirements on water, pipes and other aspects.

Zum Beispiel, pipes, because water needs extremely high pressure to cut hard materials, so pipes must also withstand extremely high pressure. This pressure is far greater than 700 trillion, which is the pressure that the thin steel plate itself can withstand. Moreover, there are also requirements for the water used in the CNC water jet cutting machine. A proper amount of soluble emulsified oil should be added to it, and the pressure can be as high as 1700 MPa at a time. The high-pressure water sprayed out can cut the material like a knife, and it becomes much easier.