English
العربية
Français
Deutsch
پارسی
Português
Русский
Español
A pure waterjet nozzle tube is a type of nozzle used in waterjet cutting machines that use only water as the cutting medium, without the addition of abrasive particles.
Description
Pure Waterjet Nozzle Tube 10138584
Pure Waterjet Nozzle Tube 10138584 is applied for SL-VI 50HP pump
Nozzle Tubes
| Nozzle Tubes | Description
| Nozzle Tubes | Description
| ||
| Actual in (mm) | Nominal in (mm) | Actual in (mm) | Nominal in (mm) | ||
| 10181113 | 2.65 (67.31) | 3.00 (76.20) | 10138451 | 8.65 (219.71) | 9.00 (228.60) |
| 10138402 | 3.65 (92.91) | 4.00 (101.60) | 05136023 | 9.15 (232.41) | 9.50 (241.30) |
| 10138410 | 4.65 (118.11) | 5.00 (127.0) | 10138469 | 9.65 (245.11) | 10.00 (254.0) |
| 10138428 | 5.65 (143.51) | 6.00 (152.40) | 05106224 | 10.15 (257.81) | 10.50 (266.70) |
| 05131784 | 5.91 (150.11) | 6.25 (158.75) | 05136031 | 10.65 (270.51) | 11.00 (279.40) |
| 10138436
| 6.65 (168.91)
| 7.00 (177.80)
| 05013735
| 11.65 (295.91) | 12.00 (304.80) |
| 10138444
| 7.65 (194.31)
| 8.00 (203.20)
| 05086913
| 14.65 (372.11) | 15.00 (381.0)
|
| 05106224 | 8.10 (205.74) | 8.45 (214.63) | |||
| 10138584 | 3.64 (92.46) | 4.00 (101.60) | 10138634 | 7.64 (194.06) | 8.00 (203.20) |
| 10138592 | 4.64 (117.86) | 5.00 (127.0) | 10138642 | 8.64 (219.46) | 9.00 (228.60) |
| 10138600 | 5.64 (143.26) | 6.00 (152.40) | 10138659 | 9.64 (244.86) | 10.00 (254.0) |
| 10138618 | 6.64 (168.66) | 7.00 (177.80) | 10138659
| 13.64 (346.46) | 14.00 (355.60) |
What is pure waterjet nozzle tube？
A pure waterjet nozzle tube is a type of nozzle used in waterjet cutting machines that use only water as the cutting medium, without the addition of abrasive particles. This type of waterjet cutting is often used for softer materials such as foam, rubber, and textiles, where abrasive particles are not needed to achieve a clean cut.
The pure waterjet nozzle tube works by pressurizing water to a high level, typically between 40,000 ل 90,000 psi, and then forcing it through a small orifice in the nozzle. The orifice size can vary depending on the requirements of the job, but it is typically between 0.004 و 0.020 inches in diameter.
The pure waterjet nozzle tube is typically made from materials that can withstand the high pressures and water flow rates of the waterjet cutting process, such as stainless steel or tungsten carbide. The nozzle tube is designed to be easily replaceable, as the orifice can wear down over time and need to be replaced to maintain precise cutting performance.
One advantage of using a pure waterjet nozzle tube is that it does not introduce abrasive particles into the cutting process, which can be beneficial when working with materials that are sensitive to abrasion or where a clean cut is essential. Additionally, pure waterjet cutting can be a faster and more cost-effective option compared to abrasive waterjet cutting, as the cutting process is simpler and requires less maintenance.
لكن, pure waterjet cutting is limited in its ability to cut harder and thicker materials compared to abrasive waterjet cutting, as it relies solely on the force of the water stream to cut through the material. It is important to consider the specific requirements of the job when deciding whether to use a pure waterjet nozzle tube or an abrasive waterjet nozzle tube.
المراجعات
لا توجد توصيات بعد.