Waterjet Machine Lock Washer, M10 05061486

SKU: N/A

How we can use waterjet machine properly and what should we pay attention to? Let’s understand the right operation of waterjet machine.

Description

Waterjet Machine Lock Washer, M10 05061486

Waterjet Machine Lock Washer, M10 05061486 is applied for SL-VI 50HP pump

 

ItemPart NumberDescriptionItemPart NumberDescription
172160831High Pressure Cylinder1405034764

 

Hydraulic Cylinder

 

205119151Plunger

 

1510075000

 

O-Ring, 3.75 x 4.0 x .13
372142526

 

Sealing Head Assembly1605034855

 

Backup Ring, 3.75 x 4.0
405034772

 

Hydraulic Cylinder Head1705141106

 

Socket Head Screw, M14 x 60MM
520422243

 

HP Seal Assembly

 

1872146433

 

Proximity Switch Kit

 

780073646

 

Cylinder Nut

 

2005132253

 

Piston Assembly

 

805130091

 

Hydraulic Seal Cartridge Assembly2120427804

 

Intensifier Support

 

905007786

 

Bushing Retainer Flange2220427994

 

Socket Head Screw, M10 x 1.50 x 65MM
1020497767

 

Liner, HP Cylinder2305061486

 

Lock Washer, M10

 

1110074920

 

O-Ring, 1.75 x1 .94 x .092410074409

 

O-Ring, 1.0 x 1.25 x .13
1280070352

 

Jackbolt

 

2505144183

 

Spacer Assembly, Proximity Switch
1305034798

 

Retaining Ring

 

2605081872

 

Gasket, Topworks Support

How to use waterjet machine properly?

In order to prevent fire, explosion, burst and other accidents, please abide by the following regulations:

1.Splashes, slag, and hot workpieces during waterjet machine can cause fires when they come into contact with combustibles

2. Before taking effective protective measures, it is forbidden to cut on the container containing flammable substances or sealed, otherwise it will cause explosion or burst.

3. No flammable, explosive or combustible materials should be placed in the cutting place

4.The connection of each cable must be reliable and well insulated

5. When waterjet machine cutting flammable substances or sealed containers, the relevant site must be equipped with necessary fire-fighting equipment, just in case.

 

In order to prevent fire caused by damage to the insulation performance of the waterjet machine

1.The location of the waterjet machine should be such that spatter during cutting or metal powder and metal shavings generated during other operations cannot enter the interior of the cutting machine. If it is found to have entered, be sure to cut off the power completely, remove the shell, and blow it with compressed air. statically or otherwise.

2.The accumulation of dust will cause the insulation performance to decline, and even cause the internal short circuit of the water jet cutter and affect the normal use. Please send professionals to maintain it regularly according to the actual use. The user should have a distribution box corresponding to the capacity of the water jet cutter, and should install an automatic air switch or other switches. The ground wire should be connected firmly and reliably.

 

Reviews

There are no reviews yet.

Be the first to review “Waterjet Machine Lock Washer, M10 05061486”