There is no doubt that high-pressure waterjet cutting is superior to other cutting methods, but even this cannot be done at will. Regardless of the cutting material or the operation process, some points that should be paid attention to still need to be paid attention to carefully, such as these points summarized by the editor.

Description

Waterjet Retaining Ring 05034798

Waterjet Retaining Ring 05034798is applied for SL-VI 50HP pump

Item	Part Number	Description	Item	Part Number	Description
1	72160831	High Pressure Cylinder	14	05034764	Hydraulic Cylinder
2	05119151	Plunger	15	10075000	O-Ring, 3.75 x 4.0 x .13
3	72142526	Sealing Head Assembly	16	05034855	Backup Ring, 3.75 x 4.0
4	05034772	Hydraulic Cylinder Head	17	05141106	Socket Head Screw, M14 x 60MM
5	20422243	HP Seal Assembly	18	72146433	Proximity Switch Kit
7	80073646	Cylinder Nut	20	05132253	Piston Assembly
8	05130091	Hydraulic Seal Cartridge Assembly	21	20427804	Intensifier Support
9	05007786	Bushing Retainer Flange	22	20427994	Socket Head Screw, M10 x 1.50 x 65MM
10	20497767	Liner, HP Cylinder	23	05061486	Lock Washer, M10
11	10074920	O-Ring, 1.75 x1 .94 x .09	24	10074409	O-Ring, 1.0 x 1.25 x .13
12	80070352	Jackbolt	25	05144183	Spacer Assembly, Proximity Switch
13	05034798	Retaining Ring	26	05081872	Gasket, Topworks Support

What should be paid attention to during the use of high-pressure waterjet?

The thickness of the cutting material is directly related to the configuration of the waterjet, so when using it, use this as the basic basis to choose a suitable cutting head. It is not that the larger the cutting head, the better the effect. If the material thickness does not reach 2.5, the medium or large cutting head will have the output of the British system.

Secondly, if there is a gap between the material and the material, the water column sprayed by the waterjet will diverge in the gap during cutting, resulting in rough surface of the cutting material and affecting the cutting effect. When encountering some special materials, it is recommended that you choose underwater cutting operation, which is beneficial to improve cutting accuracy.

Criteria for quality waterjet

Waterjet is a commonly used processing tool in the field of cutting, but it is not up to the manufacturer to decide whether it is good or not. The key is to analyze its efficiency, failure rate, cost and other aspects. So what is the relationship between these and the service life of the high-pressure parts of the water jet? What is the standard for a high-quality water jet?

Whether the waterjet is high-quality or not should be judged from three aspects. On the one hand, it is its cutting efficiency, including the cutting quality and cutting speed. In general, the lower the cutting speed, the higher the quality of the cut produced by the water jet. Another aspect is the durability of the water jet, that is, the lower the failure rate, the higher the durability of the water jet. The quality of the devices configured in the water jet, such as high-pressure cylinders, accumulators, high-pressure plungers, check valve body plugs, high-pressure seals, and check valves, will directly affect the failure rate of the water jet.

Another aspect is the cutting cost of the waterjet, which also includes the cost of repair and maintenance. Since there is no common standard for water jet at present, the interchangeability of parts is very low, so after the meeting of purchasing water jet, the price of accessories should also be taken into consideration.