The use of a waterjet proximity switch kit can help to improve the quality and accuracy of waterjet cutting, reduce waste and errors, and increase productivity and efficiency.

Description

Waterjet Proximity Switch Kit 72146433

Waterjet Proximity Switch Kit 72146433 is applied for SL-VI 50HP pump

Item	Part Number	Description	Item	Part Number	Description
1	72160831	High Pressure Cylinder	14	05034764	Hydraulic Cylinder
2	05119151	Plunger	15	10075000	O-Ring, 3.75 x 4.0 x .13
3	72142526	Sealing Head Assembly	16	05034855	Backup Ring, 3.75 x 4.0
4	05034772	Hydraulic Cylinder Head	17	05141106	Socket Head Screw, M14 x 60MM
5	20422243	HP Seal Assembly	18	72146433	Proximity Switch Kit
7	80073646	Cylinder Nut	20	05132253	Piston Assembly
8	05130091	Hydraulic Seal Cartridge Assembly	21	20427804	Intensifier Support
9	05007786	Bushing Retainer Flange	22	20427994	Socket Head Screw, M10 x 1.50 x 65MM
10	20497767	Liner, HP Cylinder	23	05061486	Lock Washer, M10
11	10074920	O-Ring, 1.75 x1 .94 x .09	24	10074409	O-Ring, 1.0 x 1.25 x .13
12	80070352	Jackbolt	25	05144183	Spacer Assembly, Proximity Switch
13	05034798	Retaining Ring	26	05081872	Gasket, Topworks Support

What is the purpose of a waterjet Proximity Switch Kit?

A waterjet proximity switch kit is a device that is used to improve the accuracy and efficiency of waterjet cutting machines. The purpose of this kit is to help the waterjet cutting machine maintain a consistent distance between the nozzle and the material being cut, which helps to ensure that the cut is precise and accurate. It sends this information to the machine’s controller, which adjusts the height of the nozzle as needed to maintain the correct cutting distance. This helps to prevent errors caused by variations in material thickness or warping, and it can also help to extend the life of the cutting nozzle by preventing it from coming into contact with the material being cut.

Overall, the use of a waterjet proximity sensor kit can help to improve the quality and accuracy of waterjet cutting, reduce waste and errors, and increase productivity and efficiency.

A waterjet proximity switch kit typically includes a proximity sensor, which is a device that detects the distance between the nozzle and the material being cut. The sensor can be mounted on the cutting head or on the machine’s gantry, depending on the specific design of the machine.

When the proximity switchdetects a change in the distance between the nozzle and the material being cut, it sends a signal to the machine’s controller. The controller uses this information to adjust the height of the nozzle, ensuring that it stays at the correct distance from the material being cut. This allows the machine to maintain a consistent cutting distance, even if the material being cut varies in thickness or if the cutting surface is not perfectly flat.